USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation
FHWA Highway Safety Programs

Safety Eligibility Letter WZ-293

Hardware Type:
Work Zone Devices
Code:
WZ-293
Date:
Testing Criteria:
NCHRP 350
Device Description:
ShowMeStand ground-mounted portable sign stand
View PDF:
wz293.pdf (284.92 KB)

Safety Eligibility Letter WZ - 293

Download Version
PDF [358 KB]

DOT logo
U.S. Department of Transportation
Federal Highway Administration

1200 New Jersey Ave. S.E.
Washington, D.C. 20590

October 22, 2010

In Reply Refer To: HSSI/WZ-293

Mr. Mike O’Neal
1929 Buford Boulevard
Tallahassee, FL 32308

Dear Mr. O’Neal:

This is in response to your September 17 e-mail correspondence requesting the Federal Highway Administration’s (FHWA) acceptance of your company’s ShowMeStand™ ground-mounted portable sign stand as a crashworthy traffic control device for use in work zones and elsewhere on the National Highway System (NHS). Accompanying your letter was the FHWA Office of Safety Design form and an engineering comparison with the Missouri Ground Mounted Temporary Sign Stand, covered in FHWA acceptance letter WZ-219. You requested that we find this device acceptable for use on the NHS under the provisions of National Cooperative Highway Research Program Report 350 “Recommended Procedures for the Safety Performance Evaluation of Highway Features.” The Missouri stand was modified as follows:

The support tube (30" length galvanized “Telespar” 1-1/4" square perforated steel tube) will be replaced with galvanized or plain (painted) non-perforated 30 length of 1-1/4 square (11 gauge or 12 gauge) steel tube.

This letter is the acknowledgement of the FHWA’s acceptance of your request. The original completed form has been modified by the addition of the FHWA acceptance letter number and the date of our review. The form, of which a copy is enclosed for reference, will be posted on our Web site in the near future.

 

Sincerely yours,

/* Signature of Michael S. Griffith */

Michael S. Griffith
Director, Office of Safety Technologies
Office of Safety

Enclosure